|
This
Update works only with NEC Retail & Bulk
drives, not with OEM releases. OEM means part of a full PC package or
external USB or FireWire variant of this burner. For OEM products contact
directly your dealer, distributor or manufacturer of PC- or USB/ Firewire-
package for service, support and firmwareupdates.
You can update from:
ND-2510A (GEN) with installed Firmware 2.15, 2.16, 2.17 and 2.18
ND-2510A (GNPF)
with installed Firmware
2.01, 2.02, 2.03, 2.04, 2.05, 2.06 and 2.07
(you
will find marking on sticker on top
side of your burner)
Pls note following instructions
for update procedure:
Connect drive to secondary IDE channel
as Master
Disconnect all slave hardware from IDE secondary Master
Use standard UDMA-2 IDE cable
Update in Windows "Safe Mode"
Under Windows 2000 & XP login as administrator
In problem case update without DMA mode, under Windows XP & 2000 in the
device manager - "IDE ATA/ ATAPI controllers", you can switch from
DMA to PIO mode
Disconnect all external USB/ FireWire devices.
Deactivate virusscanners, active desktop programs and packetwriting agents
Do not turn off power during the updating process.
Note: Warranty will be lost during false updating procedure, especially unofficial modified firmwares were used
before.
In such cases we could not offer you a solution any more. You have to repair it by cost then.
|
|
INSTALLATION: After unzipping file
pls. double click for
unit ND-2510A (GEN) on
"K251GN90.exe" file
unit ND-2510A (GNPF) on "K251GFA1.exe" file
follow instructions. After, you have
to reboot your system.
If you have problems after updating your drive use following steps:
1.Deinstall all your burnsoftware(s), also cleanup registry, e.g. registry
cleaner can be found here http://www.nero.com
2.Update your mainboard driver(s). Contact manufacturer of your mainboard/ PC
package for newest one.
3.Reinstall and
update your burnsoftware.
|
|
To be on the safe side, you can also update drive by our service partner
Euro Point external. You have to send drive to the following adress:
Euro Point Communication GmbH
Sign: Firmwareupdate
Seligenstädter Straße 100 - Halle 41
DE-63791 Karlstein a. M.
Pls. do not forget to mark delivery note with sign
"FIRMWAREUPDATE".
The price for update procedure is brutto 45,25 EUR*,
contains following:
-firmwareupdate: 25,00 EUR(netto)
-shipment costs* 14,00 EUR*(netto)
(*can increase to foreign countries)
You can check status of procedure by this phone number 0049-(0)6188-954-3600.
|